Specification
The louvre window shall incorporate the JX Louvre Window by Safetyline Jalousie (1300 68 3350) and manufactured to achieve as required by Australian Standard AS2047.
- The louvre window shall be JX by Safetyline Jalousie with 63mm extruded aluminium frame.
- The louvre window shall be capable of a maximum width of 1.4 metres.
- Each louvre shall be framed on three sides and hinged at the rear edge.
- Glass louvres should require at least 200kg pull out to remove the blades.
- Weatherproofing shall be provided by EPDM and polyethylene brush gaskets.
- Water drainage is to be via the bottom transom.
- The louvre window should be fitted with nylon end caps and capable of opening to 80Ëš at an interval of 135mm.
- A 8mm stainless steel rod inserted into the louvre bearer provides additional security.
- The handle mechanism shall be cam driven and capable of locking in at four different positions.
- Internal fly screens should snap into the frame and be easily removed for cleaning.
Height & Width - JX Safetyline Jalousie standard heights
Important:
- Wherever possible standard heights should be used
- Should standard heights not be used a cut down blade is required. If this blade is less than 60mm the opening would need to be adjusted to standard heights
- Each lever will only lift a number of louvres depending on the type and length. (Refer chart in this section)
- Where one louvre meets the other and a new lever is required a spreader bar is used which is marginally wider than the normal blade holder and the louvre above that join is 10mm smaller (Intermediate Transom)
- Add 38mm to overall frame height if standard reveals are required.
Download Specification Sheets:
To download a specification sheet, please click on a link below.
 Download:
You can download this specification in a Word document for convenience.
Need More Information?
We'd love to talk to you. Contact Us via phone or e-mail for a personal response.
|
Intermediate Transom 7798